High Efficiency Oil Filtration Articles
(Disclaimers: This set of filtration articles is the product of a late 2003 literature search, amended through December 2005. It may not be all-inclusive.)
Abelson, Paul, “Your engine’s first line of defense,” Land Line magazine archives, 2003
Analysts, Inc., “The Basics of Oil Analysis,” Jobbers World, www.jobbersworld.com/ResourceRoom/RM-OilAnaBasic.htm
Albright, Bill, North Carolina Lube Oil By-Pass Filter Project, North Carolina Division of Pollution Prevention and Environmental Assistance, June 1997-1999
“Alternative Fuels for Heavy Duty Engines: Status of Fleet Trials,” National Technical Information Service, NTIS Order Number: DE91006799, 1990
Andrews, Gordon E. and Li, Hu et al, “The Influence of an Oil Recycler on Emissions with Oil Age for a Refuse Truck Using in Service Testing,” Society of
Automotive Engineers, Incorporated, 2000
Andrews, Gordon E., and Li, Hu, et al, “The Influence of an Oil Recycler on Lubricating Oil Quality with Oil Age for a Bus Using in Service Testing,” Society of Automotive Engineers, Incorporated, World Congress, SAE Technical Paper Series #2000-01-0234, March 2000
Andrews, Gordon E., Xu, Jie, et al, “Oil Quality with Oil Age in an IDI Passenger Car Using an On Line Lubricating Oil Recycler Under Real World Driving,” Society of Automotive Engineers, Incorporated, Technical Paper Series #2001-01-1898, 2001
Andrews, Wil, “Bypass Update 001,” Trawler-World, 1999
Bartsch, Gerhard and Marcucci, Todd, “NTPOG Oil Filter Review,” North Texas Prelude Owners Group, September 2001
Bay, Chuck, “Extended Service Interval Test for Lube Filters,” City of Los Angeles – LA Sanitation Division, Fleetguard, 1999
bobistheoilguy http://www.bobistheoilguy.com/
Bowen, A. D., Rodibaugh, Scott A., “Engine Component Wear Rate on Diesels Equipped with an Oil Cleaning Centrifuge,” Society of Automotive Engineers, Incorporated, Technical Paper Series #902124, 1998
Bretell, Russ T., Clevenger, John W., “Separating Soot from Sludge!,” Fleetguard Education Services Fleetnotes, Vol 1, Issue 2, April 2001
Brown, Gene W., “Full Flow and Bypass Oil Filtration in One Unit-The LF3000,” Society of Automotive Engineers, Incorporated, Technical Paper Series #881826,1988
California Department of General Services (DGS) “Lube, Oil and Grease Supplement No. 5,” DGS, Procurement Division, 2001
California Department of Toxic Substances Control, “By-Pass Oil Filter” (Fact Sheet), Office of Pollution Prevention and Technology Development, 2001
California Department of Toxic Substances Control, “Reusable Oil Filters, By-Pass Oil Filtration System Oil Life Extension,” Best Environmental Practices for Fleet Maintenance, 2001
California Energy Commission Report, CA Air Resource Board, “California State Vehicle Fleet Fuel Efficiency Report: Volume 1, Summary of Findings and Recommendations,” Department of General Services, P600-03-003, May 2003
Cavette, Chris, “From Spin-ons to Microns,” In-Service, Primedia, February, 2001
Coombs, Paul, Cox, Ian and Samways, Andrew, “Doubling Drain Intervals-The Reality of Centrifugal Bypass Filtration,” Society of Automotive Engineers, Incorporated, Technical Paper Series #981368, 1998
Deierlein, Bob, “Are Bypass Filters The Answer To Cleaner Oil,” Bell & Howell Information and Learning, Maple Publishing, Fleet Equipment, November 2002
DellaCorte, C., Pinkus, O., “Tribological Limitations in Gas Turbine Engines: A Workshop to Identify Challenges and Set Future Directions,” National Aeronautics and Space Administration, National Technical Information Service, NTIS Order Number: N20020082901, 2002
DeMarco, Nancy, “GM: 30,000-mile Drain Intervals Are Achievable,” Lubes-n-Greases, February, 2005
Dwyer, John J., Jr., “Fleet Owner of Engines, Filters, and Extended Oil Drain Intervals,” Fleet Owner, 1999
Falk, Bryan, “Protecting Today’s Engines,” Baldwin Filters
Faria, Steve, “System 1 Filtration Group,” Joint Service Pollution Prevention Opportunity Handbook, s1filtrationgroup.com, 2003
“Ferrography & Oil Analysis (and other Oil Analysis topics),” Predictusa.com, 2004
“Fewer Oil Changes Help Save City Money,” American City & County Magazine, Vol 113, Issue 10, pp 18-19, Sep 1, 1998
“Filter News 2004,” Colorfil.com, April/Jun
Fitch, Jim, “As I See It” articles list, Noria Practicing Oil Analysis Magazine:
“Aren’t Machines Supposed to Wear Out?”
“Ask Your OEM to Accessorize New Equipment for Lubrication Excellence”
“At Last…A Lubrication Magazine for Maintenance Professionals”
“Demystifying Sludge and Varnish”
"Flushing and the Voice Within Your Oil”
"Flushing Strategy Rationalization"
"From Whence Dirt Comes"
"Headspace Management – Are You In On This Best-Kept Secret?"
"How Grease Kills"
"How Your Motives Influence Motor Oil Selection"
"Lubrication Excellence 2004 – It’s All About Learning"
"Lubrication Genesis"
"Lubrication UFOs"
"Navigating the Maze of Flushing Tactics"
"New Lubrication Commandments- Conserve Energy, Protect the Environment"
"Proactive Maintenance’s Unruly Cousin"
"Should New Lubricant Deliveries be Tested"
"The Difference Between Good Lubrication and Good Lubricants"
"The Perfect Storm…Are You Secretly Waiting?"
"Wanted: Lubrication Management Professionals"
"When to Perform a Flush"
Fitch, Jim, “Using Oil Analysis to Control Varnish and Sludge,” Noria Practicing Oil Analysis, May 1999
Filter Manufacturers Council - Technical Service Bulletins, 1983-2002:
"83-1R Overpressurized Lube Oil Filters"
"84-3R2 Light Duty Diesel Engine Service"
"89-1 Coolant Leaks into Engine Oil"
"89-5R The Micron Rating for Fluid Filters"
"88-3 Diagnosing Engine Oil Filters With Collapsed Center Tubes"
"93-3 Installation Instruction for Spin-On Filters"
"93-2 In-Sump Oil Filters"
"94-1 Severe Driving"
"94-3 Spin-On Filter Threads"
"97-8R The Impact of Dents on Canister Filters"
"98-1 Extended Oil Drain Intervals,"
"99-3 Universal Oil Filter Installation Symbols"
"02-2 Filtration Media "
Fleetguard Test Report – “Differentiating Filter Performance by Oil Analysis Results,” 2003
Frame, E.A.,”Natural Gas Lube Oil, Topical Report,” September 1989-January 1999, National Technical Information Service (NTIS), NTIS Order Number: PB92-101492, 1991
Frehland, Peter, Fischer, Helmuth, & Paffrath, Hoger, “The Free Jet Driven Centrifugal Cleaner – A Present and Future Concept for Oil Filtration,” Society of Automotive Engineers, Incorporated, Technical Paper Series #1999-01-0824, 1998
“Full Flow Lubricating Oil Filters - Multipass Method for Evaluating Filtration Performance, Surface Vehicle Standard,” Society of Automotive Engineers, Incorporated, SAE J1858, 1988
Galligan, Jim, Bypass Filters Pass Buss Test, Light & Medium Truck, February 2001
Goyal, A.K. and Willyoung, R.W., “Engine Oil Filter Performance with Synthetic and Mineral Oils,” Society of Automotive Engineers, Incorporated, Technical Paper Series 850549 1985
Gulf Coast Filters, “Understanding Lube Oil and Its Job Functions,” Gulf Coast Filters Inc., http://www.gulfcoastfilters.com/
Hoagland, N. Theresa T., “Project Summary, Pollution Prevention Alternatives,” Naval Station Mayport, FL, U.S. EPA National Risk Management Research Laboratory, Cincinnati, 1995
Holm, Christopher E., Verdegan, Barry M., Schwandt, Brian W., and Fallon, Stephen L., “Cleanable Hydraulic and Engine Lubricating Oil Filters for Off-Road Applications,” Society of Automotive Engineers, Incorporated, Technical Paper Series 961834, 1996
“Honeywell and PuraDYN Link Up,” PRIMEDIA Business Magazine & Media, Inc, Fleet Owner, 2003
Iwakata, Keisaku, Yasuyuki, Onodera, Mihara, Kenji, and Ohkawa, Satoshi, “Nitro-Oxidation of Lubricating Oil in Heavy-Duty Diesel Engine,Tribological Insights and Performance Characteristics of Modern Engine Lubricants,” Society of Automotive Engineers, Incorporated, Technical Paper Series #932839, 1993
Jen, C., “Automatic Self-Cleaning 5 Micron Fuel Oil Filters. Phase 2. - Final Report,” 26 Nov 99, National Technical Information Service, NTIS Order Number: ADA371427, 1999
Jetter, S.M., Kelly, K.J., and Ragomo, M.A., Nycz, D.S., Karl, G.M., Gullet, D.G., et al Caterpillar, Incorporated, “Engine Oil Filter Performance with Synthetic and Mineral Oils”, Society of Automotive Engineers, Incorporated, Technical Paper Series 982718, 1998
Kaleli, Hakan, Khorramian, Behrooz, “Used Oil Analysis and Study of Oil Drain Period in Gasoline Engine,” Society of Automotive Engineers Technical Paper Series #981448, May 1998
Kaufman, Michael, “Exposing the 3,000 Mile Change Myth,” The Motor Oil Bible, 2001
Kilcarr, Sean, “Betting on Bypass,” FleetOwner, November 1, 2004
Keromest, C., Synthesis, “Characterization and Application to Lubricating Oil of Phospho-Sulfured Polymers Additives B Thesis,” National Technical Information Service, NTIS Order Number: DE95729626, 1992
Knize, Russ W., “Engine Oil Filter Study,” Internet: minimopar@xoommail.com, 2000
Kovalchenko, A., Ajayi, O.O., Erdemir, A. and Fenske, G.R., “Friction and Wear Performance of Low-Friction Carbon Coating Under Oil Lubrication,” National Technical Information Service, NTIS Order Number: DE2001-795815, 2001
Lagow, R.J., “Synthesis of New High Performance Lubricants and Solid Lubricants,” National Technical Information Service, NTIS Order Number: DE92011940,1992
Lawrence, Mark, “Motorcycle Oil Filters and Air Filters,’ MotorcycleInfo.Calsci.com, 2003-2004
Lefebvre, Byron, “Impact of Electric Mobile Oil Refiners on Engine and Hydraulic Equipment Wear and Eliminating Environmentally Dangerous Waste Oil, (RheoTribology of Automotive Lubricants and Fluids),” Society of Automotive Engineers, Incorporated, Technical Paper Series #942032, 1994
Lockridge, Deborah, “Slippery Situation-Oil developers say meeting the 2007
standards will be tougher than ever,” Heavy Duty Trucking, 2004
Loftis,Ted S. and Lanius, Mike B., “A New Method for Combination Full-Flow and Bypass Filtration: Venturi Combo”, Society of Automotive Engineers, Incorporated, Technical Paper Series #972957, 1997
“Luberfiner Filters, What You Should Know About Extended Drain Intervals,” Champion Laboratories Website.
Mason, C.F., Frame, E.A., “By-Pass Oil Filter Test Two-Year Program - Final Report,” May 1987- June 1990, Army Tank-Automotive Command, National Technical Information Service, NTIS Order Number: AD-A228 004/8, 1990
Masters, Ron D. and Campagna, William J., Jr., “Filtration 101,” Filtration and Separation, August 1999
Matthews, Ben, Dr., “Environmental Sustainability Report,” North Carolina Department of Public Instruction, 2000
McFall, David, “Drain Intervals: How Long Must We Wait?,” Lubes n Greases, Vol. 9, Issue 3 (Automotive), March 2003
McFall, David “Mobil’s Coup: High Endurance Oil”, Oil Analysis, 2005
McFall, David, “Motor Oil Drain Intervals: An Ethical Burden?,” Lubes n Greases, Vol. 9, Issue 3 (Automotive), December 2003
McGuffie, Deborah, “Oil Filter update”, Fleet Owner Magazine, PRIMEDIA, 2002 and 2003
“Miami-Dade System Keeps Oil Running Longer,” American City & County Magazine, PRIMEDIA November 1, 2000
Moore, Walt, Stewart, Larry, “Know your by-pass filtration basics,” Gale Group, Inc via LexisNexis, Reed Business Information Construction Equipment, 2002
Moran, A.H. Yavrouian, “Additives for High Temperature Liquid Lubricants. Quarterly Progress No. 1,” Jet Propulsion Lab, National Technical Information Service, NTIS Order Number: DE91011018, 1991
Morris, Kathryn, “puraDYN Announces Worldwide Coverage for Patent Full-Flow and Bypass Oil Filtration Systems; New Design Delivers Total Oil Filtration in One Package,” Business Wire, Inc, 2003
Noria Oil Analysis Bookstore Online, Oil Analysis Magazine, Noria Corporation, 2003
North Carolina Division of Pollution Prevention and Environmental Assistance, “Engine Oil By-Pass Filters,” North Carolina Department of Environment and Natural Resources, August 1996
North Carolina Division of Pollution Prevention and Environmental Assistance, “Oil Related: Used Oil Filters,” North Carolina Department of Environment and Natural Resources, 1998
Pacific NW Pollution Prevention Research Center Pollution Prevention Research Projects Database, “Oil Life Extension” 1992 – 1995
Pacific NW Pollution Prevention Research Center, Pollution Prevention Research Projects Database, “Evaluations of Three Oil Filter Designs for Pollution Prevention Effectiveness,” National Technical Information Service, 1991-1996
Parker, Jim, “Longer Equipment Life Through Better Filtration,” North Carolina Department of Transportation, 1999
Phillips,O.H. and Lane, P.D., “Diesel Engine Wear with Spin - On Bypass Lube Oil Filters,” Society of Automotive Engineers, Incorporated, Technical Paper Series 790089, 1979
“puraDYN’s Grafting Process Shows Dramatic Improvement in Contaminant Reduction in Engine Oil; Vehicles Involved in Extended Test Exceed Client Expectations,” Business Wire, Inc, 2001
Ramsey, Mike, “Lubrication Tips for Reliability Professionals,” Noria Corporation, April 10, 2002
Sadeghi, Farshid, “Annual motor oil usage reduction and engine life extension through bypass and full flow bypass oil filtration for INDOT heavy duty vehicles,” INDOT Joint Transportation Research Program, 2003
Samways, Andrew L. and Cox, Ian M., “A Method for Meaningfully Evaluating the Performance of a By-Pass Centrifugal Oil Cleaner,” Society of Automotive Engineers, Incorporated, Technical Paper Series #980872, 1998
Sanami,Yoshihisa, Shuji Yamaguchi and Keizo Funae, “Development of New Filter-Element for Oil Filter,” Society of Automotive Engineers, Incorporated, Technical Paper Series #2000-01-0916, 2000.
Sauer, Theodore C., and McGillick, Richard F., “Automotive Lube Oil Filters for Extended Service at High Crankcase Oil Temperatures,” Society of Automotive Engineers, Incorporated, Technical Paper Series #790090, 1979
Schleider, Michael and Elliot, David, “Lubricant Analysis Programs,” Joint Service Pollution Prevention Opportunity Handbook, September 2001
Schleider, Michael and Scott, R., “Reusable Filter for Vehicle Motor Oil,” Joint Service Pollution Prevention Opportunity Handbook, April 2002
Schleider, Michael, “ByPass Filter For Vehicle Motor Oil”, Joint Service Pollution Prevention Opportunity Handbook, November 2003
Schwalb, J.A., “Wear Mechanism and Wear Prevention in Coal-Fueled Diesel Engine Traditional Approaches to Wear Prevention,” Southwest Research Institute, National Technical Information Service, NTIS Order Number: DE2001123, 1991
Schwandt, Brian W., and Verdegan, Barry M., “Influence of Lube Oil Filter Performance on Engine Wear in City Buses,” Society of Automotive Engineers, Incorporated, Technical Paper Series #902238, 1979-1990
Schwandt, Brian W., Verdegan, Barry M., and Holm, Christopher E., Kelly, S., Bohmann, Michael, “Optimizing Lubricating Oil Filtration Systems for Diesel Engines,” Society of Automotive Engineers, Incorporated, Technical Paper Series #930017, 1978-1992
Schwandt, Brian W., Verdegan, Barry M., Holm, E. Christopher, Fallon, Stephen L., Khosropour, Michael M., “Cleanable Heavy Duty Oil Filters for Trucks and Buses,” Society of Automotive Engineers, Incorporated, Technical Paper Series #962240, 1996
Sigaty, T., Reller , C., and Middaugh, D., Project Summary – “Waste Oil Reduction for Diesel Engines – Final report,” U.S. EPA R&D, EPA/600/SR-96/092, 1996
Singler, R.E. and Bieberich, M.J., “Synthetic Lubricants and High-Performance Functional Fluids - Phosphazenes - Final report,” National Technical Information Service, NTIS Order Number: AD-A262 545/7, 1993
Smith, Paula, “Maintenance Makes a Difference,” United Parcel Service webpage, http://ups.com/pressroom/us...releases/press release/, 2003
Society of Automotive Engineers (SAE) Engine Committee, “Standard Oil Filter-Test Oil SAE J1260” Apr89, SAE Handbook, 1989.
Society of Automotive Engineers (SAE) Oil Filtration papers list, SAE Incorporated website, 1985-2000
Southern Africa International Tribology Articles, (SAIT Publications), 1988-2002
“Stepping into an Oil Analysis Program,” unknown source edited by DTSC staff in 2004
Su, F., Engine Systems Development Centre, “Simplified Fuel Additive Test, Phase III: Testing and Verification,” National Technical Information Service, NTIS Order Number: MIC-102-01545, 2001
Sullivan, Tim, “Mack Raises Diesel Oil Bar”, Lube Report, s1filtrationgroup.com, 2003
Tauber, Thomas, “Air 1828 – A Guide to Gas Turbine Engine Oil System Monitoring,” Society of Automotive Engineers, Incorporated, 1983
Thom, Rudolf, Kollmann, Karl, Warnecke, Wolfgang, Frend, Mike, “Extended Oil Drain Intervals – Conservation of Resources or Reduction of Engine Life,” Society of Automotive Engineers, Incorporated, Technical Paper Series #951035, 1995 and Part II, Technical Paper Series 981443, 1998.
Troyer, Drew D., “Get Ready for More Soot,” Practicing Oil Analysis, Noria Corp., 1999
Troyer, Drew D., “Synthetic Oil Solves Turbocharger Problem”, Practicing Oil Analysis, Noria Corp., 1999
Trujillo, Gerardo, “Resetting Oil Analysis Parameters for Changing Diesel Engines,” Practicing Oil Analysis, Noria Corp., 2004
“Tribology” (Papers, Web Links), University of Florida, Mechanical Engineering Department, Tribology Laboratory, grove.ufl.edu, 2004
Used Oil Recycling Program – “Refiners, Blenders, and Distributors of Re-refined Oil,” California Integrated Waste Management Board (CIWMB), 1995
Used Oil Recycling Program, “Rerefined Oil State Contract: June 1, 1999 to November 30, 2001,” California Integrated Waste Management Board, 1999
“Used Oil Recycling Rate Annual Report: 2001,” California Integrated Waste Management Board Used Oil Recycling Program, 2001
Verdegan, Barry M. Shwandt, Holm, E. Christopher, and Fallon, L. Stephen, Nelson Industries, Inc. “Protecting Engines and the Environment- A Comparison of Oil Filtration Alternatives (Topic in Automotive Filtration Design),” Society of Automotive Engineers, Incorporated, Technical Paper Series #970551, 1997
Viglee, Abbas, Fages, Albert W., The Seven Steps to Cost Effective Contamination Control, National Fluid Power Association Technical Paper Series 100-10.4, April 2000
“What’s New in Bypass Filtration,” FleetOwner, Primedia, January, 1997
Wright, Tim, “SHOClub.com Presents: Oil and Oil Filters 101,” SHOClub.com, 2001
York, E. Marion, “Extending Engine Life and Reducing Maintenance through the Use of A Mobile Oil Refiner,” Society of Automotive Engineers, Incorporated, Technical Paper Series #831317, 1983
Zirker, Larry and Francfort, James, “Oil Bypass Filter Technology Performance Evaluation,” U.S. Department of Energy Idaho National Engineers and Environmental Laboratory, FreedomCAR & Vehicle Technologies, January 2002
The following articles came from www.noria.com/learning_center/default.asp?sectionlink=Technology
David C. Schalcosky and Carl S. Byington, Penn State University Applied Research Laboratory “Advances in Real Time Oil Analysis,’, Oil Analysis Noria Tribology Predictive Maintenance 2004
Sharon H.Dory and Art Durnan,J.R.Simplot Company “ A Picture is Worth a Thousand Words J.R. Simplot Applies Straightforward Proactive Oil Analysis to Remain Competitive,” Oil Analysis Noria Tribology Predictive Maintenance, 2004
Ivan Sheffield, Schroeder Industries, “Changes in Filtration and Contamination-Switching Directions for the Filtration Industry,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Ref: Scwartz, S.E. and D.J. Smolenski, “GM’s Oil-Life System Improves Timings of Oil Change,” Practicing Oil Analysis Magazine, 2004
Drew D.Troyer, “A Quick and Easy Test for Wear Debris,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Teresa Hansen, “A Tribute to Vernon C. Westcott , Inventor of the Ferrograph,” Oil Analysis Noria Tribology Predictive Maintenance 2004
David C. Schalcosky and Carl S. Byington, Penn State University Applied Research Laboratory, “Advances in Real Time Oil Analysis,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Michael Barrett and Matt McMahon, Insight Services, “Analytical Ferrography-Make it Work for You,” Oil Analysis Noria Tribology Predictive Maintenance 2004
William R. Herguth and Guy Nadeau, Herguth Laboratories Inc. “Applying SEM-EDS to Practical Tribology Problems,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Stephen Cuppett, Armen UE, “ASTM Updates Oil Analysis Standards for Turbine and Auxilary Power Plant Equipment,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Dr. Thomas G. Dietz, Exxon Co. USA and Eric Linxweiler, DSG, “Contact Memory- A New Tool for Managing Lubrication and Oil Analysis Activities,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Sabrin Khaled Gebarin and Jim Fitch, “Determining Proper Oil and Filter Change Intervals: Can Onboard Automotive Sensors Help?,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Malte Lukas, “Development of an ASTM Standard Test Method for Used Oil Analysis by the Rotating Disk Electrode Emission Spectroscopy Technique,” Oil Analysis Noria Tribology Predictive Maintenance 2004
Ocatavo Catalan, Ingelube S.A., “Diesel Engine Oil Particle Analysis-Solution to SOOT Problem,” Oil Analysis Noria Tribology Predictive Maintenance 2004
James K. O’Rourke, The TAK Group, “E-Commercing Oil Analysis”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Mark Barnes, “Elemental Analysis”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Terry Smith, Lubrication Engineers, Inc. “Environmentally Friendly Lubricants-Biodegradable or Nontoxic”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Ray Garvey,CSI “Get a Handle on Grease”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Drew D. Troyer, “Get Ready for More SOOT”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Clifford L. Smart ,XCEL Energy, Inc. “Get Smart with Improved TAN Titrations”, Oil Analysis Noria Tribology Predictive Maintenance 2004
“GM’s Oil-Life System improves Timing of Oil Change”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Leonard Bensch, PH.D.,Pall Corporation, “How to New ISO Particle Count Standard Will affect You”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Steve Reily,Design Maintenance Systems,Inc., “Integrated Management of Lubrication and Lubricant Analysis Information-Part I- the Case for an Integrated System”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Teoman Kupelli,Trans Ticaret Company, Hayri Yaba and Gerald Munson, ISOPur Fluid Technologies Inc. “ISOPur Rids Boiler Feed Pump of Sludge and Varnish”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Drew D. Troyer, “Let’s Integrate Oil Analysis and Vibration Analysis”, ”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Scott Stoeffler, McCrone Associates, “Look Deeper into Samples Using Chemical Microscopy”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Pulliyur Madhavan and Mike Steves, Pall Corporation, Gary Rosenberg, Pall Aerospace and J. Schindler, Austin AL “Lubricants Condition Monitoring using Filter Debris Analysis”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Mark Barnes, “Lubrication Training Goes High Tech”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Zane Winberg, LubeTrak “Making the Most of Oil Analysis Data”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Mark K.Smith, Analysts, Inc. “Monitoring Moisture in Refrigeration Compressor Lubes”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Seun Omole,Eaton Corporation “New Dimensions to Failure Analysis, Using XRF Technology”, Oil Analysis Noria Tribology Predictive Maintenance 2004
“New Discoveries on the Formation of Friction Polymers”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Dick Gangnon, JLM Systems Limited , “New Generation Reservoir Accessory Advances Oil Maintenance”, Oil Analysis Noria Tribology Predictive Maintenance 2004
Peter G. Ball, Machine Reliability Services Pty Ltd, Australia “New pH Test Offers Benefits over TAN/TBN Oil Analysis Noria Tribology Predictive Maintenance 2004
Jim Fitch, “Oil Analysis for the New Millennium”, Oil Analysis Noria Tribology Predictive Maintenance 2004
John Evans, Wearcheck South Africa, “Oil Analysis Statistics Show Frequencies of Common Problems”, Analysis Noria Tribology Predictive Maintenance 2004
“Oil Oxidation Found to Reduce Scuffing”, Analysis Noria Tribology Predictive Maintenance 2004
Sabrin Gebarin, “On-line and In-Line Wear Debris Detectors: What’s Out There?” Analysis Noria Tribology Predictive Maintenance 2004
Mark Barnes, “Photoacoustic Spectroscopy-The Future in Contaminations Monitoring?”, Analysis Noria Tribology Predictive Maintenance 2004
Robert W.Bowden, Equilon Enterprises, LLC, “Reclamation Reality Check- Is Oil Reclamation Right for your Company?, Analysis Noria Tribology Predictive Maintenance 2004
Paul Higgins, Dingo Maintenance Systems , “Re-Engineering Oil Analysis with Information Technology”, Analysis Noria Tribology Predictive Maintenance 2004
Terrence O’Hanlon, ReliabilityWeb.com , “ Reliability Resources on the Internet”, ”, Analysis Noria Tribology Predictive Maintenance 2004
“Scanning Electron Microscopy for Wear Particle Identification”, Analysis Noria Tribology Predictive Maintenance 2004
Gery Blevins and John Evans,Wearcheck South Africa, “Silicon…Enemy#1”, Analysis Noria Tribology Predictive Maintenance 2004
Daniel Anderson, Spectro, Inc. “Spectroscopy for Large Particle Measurement”, Analysis Noria Tribology Predictive Maintenance 2004
William R. Herguth,CEO Herguth Laboratories “ Spotting Oil Changes Using Radial Planar Chromatography”, Analysis Noria Tribology Predictive Maintenance 2004
Robert M. Gresham, Director of Education and Certification, STLE “STLE is Your Partner in Oil Analysis”, Analysis Noria Tribology Predictive Maintenance 2004
A.A. Carey andd A.J.Hayzen,CSI “The Dielectric Constant and Oil Analysis”, Analysis Noria Tribology Predictive Maintenance 2004
Jim Fitch “The Enduring Flash Point Test”, Analysis Noria Tribology Predictive Maintenance 2004
Martin K. Williamson, Entek IRD International, “The role of Oil Analysis Within an Asset Optimization Program”, Analysis Noria Tribology Predictive Maintenance 2004
Drew D Troyer “The Sequential Four Ball Test”, Analysis Noria Tribology Predictive Maintenance 2004
Drew D Troyer “The Visual Crackle-A New Twist to an Old Technique”, Analysis Noria Tribology Predictive Maintenance 2004
Jay Powell, Bio-Rad Laboratories, “Trending Additive Depletion”, Analysis Noria Tribology Predictive Maintenance 2004
Greg J. Livingstone, Clarus Technologies, “Trendsetting Technologies in Contamination Control”, Analysis Noria Tribology Predictive Maintenance 2004
Benjamin Fried,CTRL Systems Inc, “Ultrasound for Better Lubrication”, Analysis Noria Tribology Predictive Maintenance 2004
Jaroslav Cerny,Department of Petroleum Technology and Petrochemistry,Institute of Chemical Technology,Prague,Czech Republic, “Using Calorimetry to Measure Motor Oil Remaining Useful Life”, Analysis Noria Tribology Predictive Maintenance 2004
Sabrin Gebarin, “Using Electron Microscopy in Oil Analysis Applications-Comparing SEM to TEM”, Analysis Noria Tribology Predictive Maintenance 2004
“Using Oil Color as a Field Test”,” Analysis Noria Tribology Predictive Maintenance 2004.
“Using Photometry to Analysis Engine Oil Soot”, Analysis Noria Tribology Predictive Maintenance 2004.
Jim Fitch, “What Particles Mean and Why They Need to be Monitored and Controlled”,Analysis Noria Tribology Predictive Maintenance 2004.
Robert Whitlock, US Naval Research Laboratory, Gary Humphrey,JOAP TSC DOD,Darrell Churchill, GasTOPS Ltd., “X-Ray Fluorescence Spectroscopy-The Next Generation of Wear Debris Analysis”, Analysis Noria Tribology Predictive Maintenance 2004.
Joanna A, Wolska and Bruno A.R. Vrebos,PANaLytical, “XRF: A Powerful Oil Analysis Tool”, Analysis Noria Tribology Predictive Maintenance 2004.
www.noria.com/learning_center/default.asp?sectionlink=Technology
